浅析城市园林绿化及树木的养护管理

园林绿化树木养护管理是绿化工作的重点也是难点。从树木的修剪、林木施肥、病虫害防治等方面论述了园林绿化树木养护管理的基本方法和步骤,为园林绿化工作者提供了第一手的实践经验。     

细足捷蚁入侵云南河口植胶区初报

研究报道2008年河口植胶区橡胶林内出现细足捷蚁,随后2009、2010年发生面积扩大,对人、橡胶树造成伤害;介绍细足捷蚁种类鉴定、形态、生物学习性和防治试验结果。     

云南橡胶树气刺微割采胶新技术研究应用进

详细介绍了云南植胶区进行气刺微割采胶新技术试验的研究内容及应用实施情况，通过4 a的微割试验示范研究，比较系统的分析了云南微割采胶试验的产量效应、干含、割胶速度、耗皮量、死皮性状、净增长率等生产性数据。说明了微割采胶新技术具有操作简单、割胶速度快、产量好、节约原生树皮、死皮较轻等特点，并能显著降低割胶劳动强度，有效的提高割胶劳动生产率。全面的掌握了这一新技术的应用原理、实施技术、材料配用、操作规程、安全风险，积累了良好气刺微割推广应用基础。     

中原牡丹花黄酮定量方法的研究

借助于紫外扫描,通过对氯化铝显色法、硝酸铝—亚硝酸钠显色法和直接测定法3种比色方法与高效液相色谱法测定结果的对比和方法评价的研究,确定了直接测定法(测定波长为350 nm)是一种操作简单、结果较准确的方法。以芦丁为标准品,可用于中原牡丹花黄酮含量的快速测定。     

探讨如何提高大树移植的成活率

据各大城市提供的数据分析,大树移植的成活率仅在50%左右,这个问题日益受到有关专家及园林建设者们的重视。如何提高大树移植的成活率?笔者经过多年的实践,认为,大树移植是一项系统的工程,需要严格的技术要求和具体的养护措施,只有遵循自然生长规律,才能收到较好的成活效果。     

树形结构对果树生产能力的影响分析

果树树形与结构是影响果树产量的重要因素,笔者结合国内外的研究状况,综述了不同树形结构对光能利用率、营养与生殖、抗逆性、产量品质、实际生产的影响,指出适宜的栽植密度、合理的树形结构是保证果园光照良好,产量和品质提高的重要措施。     

外源NO缓解果树胁迫的作用机理和研究进展

一氧化氮(Nitric oxide, NO)是一种重要的信号分子，广泛参与果树的生长发育调控和对生物与非生物环境胁迫的应答反应。大量证据表明，外源NO是缓解果树干旱、高温和酸雨等胁迫中重要的信使分子，其信号转导机制目前已广受人们关注。文章综述了NO的来源、NO的双重作用及作用机理、NO与其他信号分子间的关系以及近年来外源NO缓解果树胁迫的研究进展，为外源NO缓解果树胁迫的深入研究提供参考资料。     

Crown development in young Picea abies stands

A dynamic model of branch length and weight growth was developed for two contrasting sites, both with young stands of spruce. At one site sample trees were obtained from both unfertilised plots and from plots with increased growth rate maintained by annual fertilisation. At the second site unfertilised trees and trees subject to single applications of fertiliser were modelled. A model of the same structure was developed for each site and tested by application at the alternate site. In view of the close agreement between sites, model parameters were calculated based on all data combined. The model is driven by height increment and branch age. The sample trees were mostly open grown so that only a tentative estimate of the effects of between tree competition is given. The limitations of the model are stressed.     

基于故障树的电控汽油发动机无法启动故障诊断分析

汽车无法启动是常见故障,在短时间里寻找故障发生的原因往往相当困难。故障树分析法作为分析系统可靠性和安全性的一种重要方法,为复杂系统的故障查找提供了一种有效的途径。以奇瑞A3无法启动为例,建立了发动机无法启动的故障树模型,设计出了发动机无法启动故障诊断流程图,结合诊断的实际经验与相应的辅助检查,能够对汽油发动机无法启动故障发生的部位作出快速准确的判断。     

Needle Collection Time for Nutrient Evaluation in Christmas Tree Production

Christmas tree needle sampling to evaluate nutrient need is an established practice. Data to support the recommended fall sampling time in Oregon and Washington were not found. In addition, the recommendation for needle sampling of Fraser fir in North Carolina was made without data from winter months. The goal for this article is to affirm or modify recommended needle sampling time. Needles of Douglas fir, Turkish fir, Nordmann fir, Noble fir, Grand fir, and Fraser fir Christmas trees were collected monthly for a year, dried, and analyzed for nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), and boron (B). No single period was found for any species when needle nutrient concentration was stable for all elements determined. Needle collection time was chosen by integrating cultural practices, likelihood of nutrient deficiency, and needle nutrient concentration changes for species grown in an area. Needle collection is recommended during February in western Oregon and Washington. The current sampling time, fall, is logical for Fraser fir Christmas tree production in North Carolina.